|
|
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Products |
SHRINK TUBING - IRRAX SLEEVE SCM
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CHARACTERISTICS |
HOW TO ORDER ....  |
DIMENSIONS
PROPERTIES
TEST METHOD |
Typical Data |
|
TENSILE STRENGTH |
ISO 37 |
21 N/mm2 |
ELONGATION |
ISO 37 |
550% |
COLD BEND |
ASTM D2671 (-40¢J) |
NO CRACK |
DIELECTRIC STRENGTH |
IEC 243 |
21 kv/mm |
VOLUME RESISTIVITY |
IEC 93 |
2 x 10 |
DIELECTRIC GRAVITY |
IEC 250 |
4.1 |
WATER ABSORPTION |
ASTM D570 |
0.06% |
FLAMMABILITY |
BS 4066 |
PASS |
CORROSION |
ASTM D2671 (16HR AT 150¢J) |
PASS |
WEATHERING |
SCM |
The material from which SCM is manufactored contains carbon black to protect if from ultra-violet light. |
| Item No. | D(mm) Inner Dra | W(mm) Thickness b nom |
Length | |
| a. min. | b. max. | |||
| SCM-04 | 10.2 | 3.8 | 1.5 | ®C§”¯´×1.22M |
| SCM-07 | 19.0 | 5.6 | 2.0 | |
| SCM-11 | 28.0 | 9.5 | 2.0 | |
| SCM-13 | 33.0 | 10.2 | 2.0 | |
| SCM-15 | 38.1 | 12.7 | 2.3 | |
| SCM-17 | 44.0 | 14.0 | 2.3 | |
| SCM-20 | 52.1 | 18.2 | 2.3 | |
| SCM-27 | 70.0 | 25.5 | 2.3 | |
| SCM-35 | 90.0 | 30.0 | 2.5 | |
| SCM-50 | 125.0 | 40.0 | 2.5 | |
REMARK: a - As supplied..b - After shrinkage
 |
 |
|
Ohm cm